Tripp-Lite B126-1A1-U Manual Del Propietário página 6

Extender/Splitter Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6
cable must be used. The use of stranded wire Cat5e/6 cable or cable with a
gauge size higher than 24 AWG will result in shorter extension distance. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
3. Make sure the power to all devices you are connecting is turned off prior to
installation.
4. The installation diagram shows the B126-004 local transmitter unit. The
B126-002 installation is the same, except there are only 2 remote ports and no
local monitor port.
Up to 125 ft. at 1080p (60Hz)
OPTIONAL
LOCAL DISPLAY
16-12-182-9334F6.indb 6
B126-004
Blu-ray™
PLAYER
B126-1A0-U
B126-1A0-U
6
B126-1A0-U
B126-1A0-U
1/4/2017 4:40:05 PM