Fender Acoustic SFX Manual De Instrucciones página 4

Top Panel Features
1 1
5 5
1
CHANNEL ONE INPUT: Combination
jack for channel one accepts ¼" or
XLR inputs. Plug in an instrument
or microphone here; XLR input
provides phantom power for
microphones that require it (do
not use ribbon mics, which can be
damaged by phantom power).*
2
VOLUME: Adjusts master volume of
channel one.*
3
REVERB: Adjusts reverb level
of channel one; reverb can be
bypassed by setting knob fully
counterclockwise (optional
footswitch does not bypass reverb).*
4
EFFECTS LEVEL: Adjusts effects
level for channel one in conjunction
with that channel's four effects
selection buttons (9-12). Effects can
be bypassed by setting knob fully
counterclockwise, or by using the
optional two-button footswitch.*
3
2 2 3 3 4 4
10 10
11 11
12 12
6 6 7 7 8 8
5
PHASE: Press to reverse channel one
speaker polarity, which can help
reduce feedback.*
6
LOW: Adjusts bass tone of channel
one.*
7
MID: Adjusts midrange tone of
channel one.*
8
HIGH: Adjusts treble tone of channel
one.*
9
DLY 1: Single-repeat slapback delay
effect with 130ms default delay and
100-550ms adjustable range.*
10
DLY 2: Multiple-repeat delay effect
with 390ms default delay and 100-
550ms adjustable range.*
11
CHO: Deep-sweep chorus effect
with 1.2Hz default rate and 0.66Hz-
10Hz adjustable range.*
13 13
9 9
14 14 15 15
16 16
12
VIB: Fast Vibratone effect with
5.66Hz default rate and 0.66Hz-
5.66Hz adjustable range.*
NOTE: Adjust effect delay/rate
by tapping active effect button
twice at the desired interval. A
single tap sets the delay/rate to
the maximum interval. The effect
button flashes at the current
interval. If the effect is bypassed
from the optional footswitch, or
if the effects level knob is turned
fully counterclockwise (off), the
effect button light will turn off. Most
recent tap settings are saved when
amp is turned off. To reset all effects
to default values, hold down any
effect button while powering up the
Acoustic SFX®.
13
POWER INDICATOR: Illuminates
when the Acoustic SFX is on.
14
AUX IN: 1/8" input. Plug in external
audio player here; use external
device's volume control to adjust
accompaniment volume level.
15
PHONES: 1/8" headphone output for
both channels automatically mutes
speaker output.
16
STEREO SFX: Adjusts level of the
Stereo Field Expansion (SFX) effect,
which creates a 360-degree stereo
image using Acoustic SFX's side-
mounted speaker, reverb circuitry and
active effects (9-12). Settings of the
reverb (3) and effects level (4) controls
contribute to extent of SFX effect.
* Indicates identical channel two
feature on opposite side of top
control panel.