Rear Panel Features - Fender Acoustic SFX Manual De Instrucciones

Rear Panel Features

1 1
2 2
3 3
4 4
1
POWER: Turns the Acoustic SFX®
on and off.
2
IEC POWER INLET: IEC power
cord connects to the Acoustic
SFX here.
3
VOLTAGE SELECTOR: Used to
select correct voltage range
(100V-120V or 220V-240V) for
operation in accordance with
available power supply.
7 7
5 5
6 6
8 8
4
FUSE: Provides electrical over-
current protection for the
Acoustic SFX. Make sure that
a replacement for a blown
fuse is of the type and rating
indicated next to the fuse
holder. Make sure power is
disconnected, then remove
fuse holder by rotating it
counterclockwise with a flat-
head screwdriver.
5
FOOTSWITCH: Connect
optional two-button
footswitch (PN 7706500000)
using this ¼" input jack. Used
to remotely bypass effects
buttons on top control panel
(9-12) for each channel;
active effect indicator
lights will turn off when
using footswitch bypass.
Footswitch does not bypass
reverb effect.
6
BALANCED LINE OUT:
Connect to inputs of external
sound reinforcement and
recording devices using this
balanced XLR output jack.
Works in conjunction with
mic/line button (7).
7
MIC/LINE: Choose one of two
settings to accommodate
signal compatibility of
external sound reinforcement
and recording equipment.
Working in conjunction with
the balanced line output (6),
"out" position provides mic
level; "in" position provides
line level.
8
GROUND/LIFT: Leave this
button in the "out" position
for normal (grounded)
operation. The "in" position
disconnects the balanced line
output (6) ground connection,
which can help alleviate line
noise in some situations.
4