Würth 0701 322 Serie Traducción Del Manual De Instrucciones De Servicio Original página 25

Cutting ranges
PBS 105
The following cutting ranges can be achieved at 0°
and 45° under the normal, described operating
conditions:
Workpiece Angle
0°
45°
PBS 120
The following cutting ranges can be achieved at 0°,
45° and 60° under the normal, described operat-
ing conditions:
Workpiece Angle
0°
45°
60°
Cutting range [mm]
105
102 × 102
105 ×93
72
68 × 68
70 × 60
Cutting range [mm]
120
112 × 112
120 ×102
80
78 × 78
78 × 78
50
48 × 48
50 ×43
PBS 160
The following cutting ranges can be achieved at 0°
and 45° under the normal, described operating
conditions:
Workpiece Angle
0°
45°
Clamping workpiece
Danger posed by running saw band
Always clamp the workpiece into
¾
the vice tightly. Never hold down
the workpiece using your hands.
▸
Place the workpiece directly between vice jaws
of the vice [4], without any other objects getting
inserted in between.
Information
When clamping in flat sections or
special sections, it is imperative you take
note of the examples in Fig. V.
▸
If the wall thickness of a section is very thin, insert
a piece of similar shape inside the section. This
way you can prevent the section from becoming
crushed between the clamping jaws of the vice.
Cutting range [mm]
150
150 × 150
160 × 140
100
100 × 100
120 × 100
DANGER !
25