Imperia Restaurant Manual De Instrucciones página 6

If you have any doubts, or for any use not foreseen by this manual, contact the retailer
before installation is carried out. In the case of any communication please quote the
MODEL and the SERIAL NUMBER of the machine.
THIS MANUAL IS AN INTEGRAL PART OF THE MACHINE
This machine is not a toy. When in use it must be kept out of the reach of children.
Do not use this machine while wearing garments or aprons with flaps which may catch in
the moving parts of the pasta machine or the cutting blades. Take particular care for this
reason and for hygienic reasons that hair is tied back (it is advisable to use a protective
cap) and remove any items which may cause danger (necklaces, bracelets, etc.).
Do not use the machine if it is not working correctly or has been damaged. When making
any queries or for any communication please contact the authorised retailer, quoting the
MODEL and the SERIAL NUMBER.
DESCRIPTION OF THE MACHINE
(fig.1)
The parts of the machine are:
A - Machine body
B - Tray (support for the pasta sheet)
C - Handle (large) for the machine body
D - Clamp for fixing the machine
E - Handle (small) for use with the Simplex accessory
F - Simplex cutting accessory (supplied only on request)
USE OF THE PASTA MACHINE
(fig.2)
BEFORE USE - AFTER USE:
follow the instructions described in the section "Cleaning and Maintenance"
1 - Position the machine (A) on a flat stable surface which can bear the weight, fit the clamp
(D) into the opening (G), tighten the screw (H) until the machine is firmly locked to the table.
2 - Fit the tray (B) to the machine body (A) matching the openings (I) to the catches (L) on the
tray (B), push gently downwards until the tray (B) and the machine body (A) are firmly locked.
3 - The dough must be kept at room temperature.
4 - After turning the knob (M) to position 10 place part of the prepared dough on the rollers
(O). Press the dough gently and insert the handle (C) in the hole (N) on the machine body, turn
the handle clockwise (causing the pasta rollers to turn). This will roll out the pasta, fold the
pasta in half and pass it through the rolls again. Repeat the operation until a flat sheet of
pasta is obtained.
5 - To reduce the thickness of the pasta sheet stop the machine and turn the regulator knob
(M) to reduce the distance between the pasta rollers. Pass the sheet repeatedly through the
rollers until it is of the desired thickness.
USE THE SIMPLEX CUTTING
ACCESSORY
(fig.3)
BEFORE USE - AFTER USE:
follow the instructions described in the section "Cleaning and Maintenance"
6