Tripp-Lite B004-VUA2-K-R Manual Del Propietário página 3

Installation
Step 2. For Windows/Mac: Click the "Software Installation for Window/Mac" to start
the installation. (If the Mac version software does not start, you will need to copy it
to your local hard drive on your Mac). Follow the instructions to completion. When
the installation is complete, you will see a KVM Switcher icon on the system tray of
your desktop. Right-click to evoke the operation menu and double-click to evoke the
configuration box. For operation details of the KVM Switcher software, please refer to
the KVM Switcher Operation Reference.
• The Windows switching software is
recommended for use on Windows 98
SE or later. The Mac switching software is
recommended for use on Mac OS 10.4 [Tiger].
• The KVM Switcher Software supports both
Windows and Mac OS operating systems. For
other OS platforms such as Linux, you can still
use the keyboard hot key - ScrLk + ScrLK - to
switch PCs. However, this switching hot key is
not available on non-PC platform such as Mac OS.
Step 3. Connect the console (USB keyboard, mouse, monitor, speaker/headphone and
microphone) to the respective ports on the KVM Switch.
Step 4. Connect each KVM PC port to a computer, using the slim 3-in-1 KVM combo
cable and the audio/mic cable. After you have connected the KVM and computers
properly, you can operate the KVM Switch immediately.
• Some older computers with USB interface
might need to manually enable the USB option
in the BIOS settings before you can use any
USB devices. If your USB interface does not
work, please check the USB option in the BIOS.
• If you use Windows 95/98/SE or Mac OS and
have not yet installed a USB mouse on your
computer, there may be an error message
telling you that mouse is not detected and
prompting you to decide whether to ignore
the same message in the future. You will also
find that there isn't any mouse movement to
disable this message. You will need to install
your USB mouse on your computer first, before
connecting it to this KVM Switch.
17-10-466-932714.indb 3
Windows
No live connection detected
Current active PC channel
is on port 1
Current active PC channel
is on port 2
3
Mac OS
1
2
11/14/2017 3:02:15 PM