ASROCK Fatal1ty X79 Professional Serie Manual De Instrucciones página 23

2.5.1.2 Installing Three SLI
Step 1. Install the identical 3-Way SLI
certified because different types of graphics cards will not work together
properly. (Even the GPU chips version shall be the same.) Each graph-
ics card should have two goldfingers for the 3-Way SLI Bridge connector.
Insert one graphics card into PCIE1 slot, another graphics card to PCIE2
slot, and the other graphics card to PCIE4 slot. Make sure that the cards
are properly seated on the slots.
Two Goldfingers
Step2. Connect the auxiliary power source to the PCI Express graphics card.
Please make sure that both power connectors on the PCI Express graph-
ics card are connected. Repeat this step on the three graphics cards.
Step3. Align and insert ASRock 3-Way SLI Bridge Card to the goldfingers on
each graphics card. Make sure ASRock 3-Way SLI Bridge Card is firmly in
place.
ASRock 3-Way SLI Bridge Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
Fatal1ty X79 Professional Series Motherboard
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
®
23