ASROCK Fatal1ty X79 Professional Serie Manual De Instrucciones página 32

2.6.2 Driver Installation and Setup
Step 1. Power on your computer and boot into OS.
Step 2. Remove the AMD driver if you have any VGA driver installed in your
system.
The Catalyst Uninstaller is an optional download. We recommend using this utility to
uninstall any previously installed Catalyst drivers prior to installation.
Please check AMD's website for ATI
Step 3. Install the required drivers to your system.
For Windows
A. AMD recommends Windows
installed (If you have Windows
in your system, there is no need to download it again):
http://www.microsoft.com/windowsxp/sp2/default.mspx
B. You must have Microsoft .NET Framework installed prior to
downloading and installing the CATALYST Control Center. Please
check Microsoft website for details.
For Windows
Install the CATALYST Control Center. Please check AMD's website for de-
tails.
Step 4. Restart your computer.
Step 5. Install the VGA card driver to your system, and restart your computer.
Then you will find "ATI Catalyst Control Center" on your Windows
Step 6. Double-click "ATI Catalyst Control Center". Click "View", select "CrossFi-
TM
reX ", and then check the item "Enable CrossFireX
and click "Apply" (if you install two Radeon graphics cards). Select "3
GPUs" and click "OK" (if you install three Radeon graphics cards). Select "4
GPUs" and click "OK" (if you install four Radeon graphics cards).
32
®
XP OS:
® TM
7 / Vista OS:
ATI Catalyst Control Center
Fatal1ty X79 Professional Series Motherboard
TM
driver updates.
®
XP Service Pack 2 or higher to be
®
XP Service Pack 2 or higher installed
®
taskbar.
TM
". Select "2 GPUs"