ASROCK Fatal1ty X79 Professional Serie Manual De Instrucciones página 30

2.6.1.2 Installing Three CrossFireX
Step 1. Install the identical 3-Way CrossFireX
®
AMD
together properly. (Even the GPU chips version shall be the same.) Insert
one graphics card into PCIE1 slot, another graphics card to PCIE2 slot,
and the other graphics card to PCIE4 slot. Make sure that the cards are
properly seated on the slots.
Step 2. Use one CrossFire
and PCIE2 slots, and use the other CrossFire
graphics cards on PCIE2 and PCIE4 slots. (CrossFire
with the graphics card you purchase, not bundled with this motherboard.
Please refer to your graphics card vendor for details.)
Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graph-
ics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert
the DVI connector to D-Sub interface, and then connect the D-Sub monitor
cable to the DVI to D-Sub adapter.)
30
certified because different types of graphics cards will not work
TM
Bridge to connect Radeon graphics cards on PCIE1
TM
CrossFire Bridge
Fatal1ty X79 Professional Series Motherboard
TM
-Ready Graphics Cards
TM
-ready graphics cards that are
TM
Bridge to connect Radeon
TM
Bridge is provided