Mopar 82211442 Serie Instrucciones De Instalación página 3

Disconnect Ground From Battery
1. Remove ground from battery
a. Using a 15 mm socket, remove the negative battery cable.
Hood Switch Harness Installation
1. Routing of the hood switch
harness
a. Connect the hood switch harness
to the hood switch.
b. Route the Violet/White wire of the hood switch
harness across the upper radiator support towards
the TIPM, securing to the exsisting factory harness
with (5) wire wraps.
Battery Ground
3 of 9
Wire Wraps x 5