Briteq Powermatrix 5x5 RGB Manual De Instrucciones página 7

ENGLISH
IMPORTANT: with the included bracket you CANNOT fix more than one projector. In case you want to
hang an array of POWERMATRIX5x5-RGB you MUST use our special heavy duty hanging bracket
(order code: 4407)
RIGGING WITH OPTIONAL HANGING BRACKET:
An optional heavy duty hanging bracket (order code: 4407) is available for users
that want to hang bigger arrays:
 Remove the standard U-bracket from the projector, you don't need it.
 On top of the hanging bracket there are 2 elongated openings that can receive
M12 bolts. Fix 2 suitable truss clamps here. You can slide both clamps over a
length of 14cm to make sure that you never have problems fixing to the truss.
Make sure that both clamps are firmly fixed to the bracket!
 Put the hanging bracket on top of the projector with the opening for the "Allen
key" facing the back of the projector. And make sure it fits perfectly.
 Insert a proper "Allen key" size-8 in the hole on the hanging bracket. (Note: a T-
handle Allen Key is the best choice)
 Turn the Allen key in counterclockwise direction to firmly attach the hanging
bracket to the projector: make sure you feel a "click" and cannot turn the
"coffin lock" system anymore!
Allen Key
REMARK: if you cannot lock the bracket as described, please check if the coffin
lock is in the correct position. See pictures: if the locking pin is in the position as
shown on the left, you should turn the Allen Key in clock-wise direction until the
pin is in the position as shown on the right.
 Fix 2 suitable safety cables to the safety eyes (16) to make sure the projector cannot drop more than 20cm
if the bracket or clamps fail.
Attention: You can add a maximum of 4 horizontal rows to make the array. Vertically you can fix as much
columns together as you like.
BRITEQ
®
5/83
OPERATION MANUAL
POWERMATRIX5x5-RGB