Briteq Powermatrix 5x5 RGB Manual De Instrucciones página 9

ENGLISH
SIMPLE AUTO MODE (AUTO RUN)
Used to set the projector to standalone auto mode with different chases playing in endless loops.
Press the MODE button until "AUTO RUN" is shown on the display.
 Press the ENTER button: the repetition rate (FQN) of the chases can be set from 00 to 99.
 Use DOWN and UP buttons to change the value.
STANDALONE MODE
Used to set the projector to standalone auto mode with user adjustable options or chases.
 Press the MODE button until a number ranging from "01." to "14." is shown on line1 of the display.
 Press the ENTER button: use the UP/DOWN buttons to select one of the 14 available options/chases.
 Depending on the option/chase selected you have different settings:
 01.STATIC: (7static colors can be selected.)
 Press the ENTER button: one of the 7 static colors (CL) can be selected.
 Use DOWN and UP buttons to change the color.
 Press the ENTER button: strobe rate (Flash) can be set from 00 (no strobe) to 99 (fast).
 Use DOWN and UP buttons to change the value.
 01. to 12.XXXXX: (different chases, including color fade, color change, meteor effect, ...)
 Press the ENTER button: Speed can be set from 01 to 99.
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: strobe rate (Flash) can be set from 00 (no strobe) to 99 (fast).
 Use DOWN and UP buttons to change the value.
 13.FLOW8 and 14.FLOW9: (chases in 1 or 2 directions with choice of chase colors)
 Press the ENTER button: Speed can be set from 01 to 99.
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: strobe rate (Flash) can be set from 00 (no strobe) to 99 (fast).
 Use DOWN and UP buttons to change the value.
 Press the ENTER button: Basic color of the chase (C1) can be selected.
 Use DOWN and UP buttons to change the color. (or blackout)
 Press the ENTER button: Running color of the chase (C2) can be selected.
 Use DOWN and UP buttons to change the color. (or blackout)
BLACKOUT MODE
Used to select the behavior of the projector when DMX fails (no DMX detected).
 Press the MODE button until "BLACKOUT MODE" is shown on the display.
 Use DOWN and UP buttons to toggle between:
 BLACKOUT: output turns black while no DMX is detected.
 FREEZE: output based on the last valid DMX-signal is kept on the projector.
Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled.
BRITEQ
®
7/83
OPERATION MANUAL
POWERMATRIX5x5-RGB