Optional Installation - Corsair HD140 RGB Manual De Instrucciones

HD140 RGB FAN
Installation (Continued)
> Find a location for the HD lighting controller that allows the cable to reach
the RGB LED hub and gives you easy access to the buttons.
> Mount the HD lighting controller with the provided mounting strip.
> Plug in the 3 pin cable from the HD lighting controller into the RGB LED hub.
> Plug in the SATA power cable from the RGB LED hub into an unused
SATA power connector from the system PSU.
> Plug the fan power cable into an unused fan port on your MB or fan controller.
• The fan power cable provides power and PWM control for the fan.
• The RGB LED cable provides power and control for the RGB LED's.
> Both cables must be plugged into their respective ports for full functionality.
5
HD140 RGB FAN

Optional Installation

> An optional supplied cable allows connection to a pushbutton
to operate the mode, color, and speed options from an external source.
> Chassis buttons such as reset pushbutton or power pushbutton
are examples of pushbutton that would work with the optional cable.
> Connect the optional cable to the port on the top of the controller
(the connector on top of the HD lighting controller.)
6