Troy-Bilt 020210 Manual Del Propietário página 6

ASSEMBLY PREPARING PRESSURE
IMPORTANT: Read entire owner's manual before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
Carton
Remove high pressure hose, handle,and parts box
includedwith pressure washer.
Slice two corners at end of carton from top to bottom
so panel can be folded down fiat,then remove alt
packing material.
Roll pressure washer out of carton.
li_mmm---mm_,o _ mmm
Carton Contents
Items in the carton include:
Main unit
High pressure hose
Spraygun with quick connect fitting
Nozzle extension with quick connect fitting
Handle
Engine oil
Safetygoggles
3.
Parts Bag (includes the following):
4.
Owner's registration card
Bag containing 5 multi-colored quick connect 5.
spray tips 6.
Owner's manual 7.
Engine manual 8.
Engine warranty card 9.
Emissions control warranty card
Handle FasteningHardware Kit (which includes):
Carriage Bolts (2)
Plastic Knobs (2)
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,call the
pressure washer helpline at 1-888-611-6708.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fill out and send in registration card.
2. Verify oil dipstick has been installed into pump (Figure I).
Pump Oil Dipstick
Attach handle to main unit.
Add oil to engine.
Add fuel to fuel tank.
Connect high pressure hose to spray gun and pump.
Connect water supply to pump.
Connect nozzle extension to spray gun.
Select and installdesired quick connect spray tip.
If any of the aboveparts are missing or damaged,call the
pressure washer helpline at 1-888-611-6708.