Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
THE VACUUM PACKING SYSTEM FOR PROFESSIONAL USE
We compliment you on your purchase and thank you for your confidence in us. You are advised to carefully read
these directions, which will enable you to use the MAGIC VAC
of food preservation. Furthermore, we suggest you keep these instructions handy for further reference.
SECTION 1
bags cut from a roll or pre-cut bags
• Vacuum packing in MAGIC VAC
• Vacuum packing with MAGIC VAC
See illustrations on page 1.
(1) Vacuum gauge - It turns from yellow to green when a
vacuum has been achieved.
(2) Vacuum level - Turn the knob clockwise to increase
the vacuum and counterclockwise to decrease it.
(3) LOCK buttons - In the locked position they secure the
lid in place while the vacuum packing cycle is under
way in bags, jars and containers; they release auto-
matically.
(4) Tube air inlet - To insert the connection tube to jars,
containers, universal caps, bottle caps etc.
(5) Sealing time - Turn the knob clockwise to increase
the sealing time and counterclockwise to decrease it.
(6) Manual vacuum button "MAN VAC" - Pressing this
button will cause the vacuum pump to work conti-
nuously and cancel the preselected dial setting (2).
(7) "MAN SEAL" Manual seal button - Pressing the but-
ton will immediately trigger the sealing process, can-
celling the pre-selected vacuum setting on the dial (2).
(8) ON(I)/OFF(0) switch - Press to turn on the MAGIC
VAC
®
, keep the switch on OFF (0) when you are not
using it.
(9) Sealing indicator light - When the sealing process is
MAGIC VAC
CONTENTS
page 14
page 15
page 16-18
®
®
page 16
®
®
page 17
®
page 17
page 17
®
page 17-18
page 18
page 18
page 19
APPLIANCE NAMES and FUNCTIONS
Maxima
®
PATENTED
®
Maxima properly and obtain optimal results in terms
- INFORMATION ON VACUUM
PRESERVATION OF FOODSTUFFS
• THE ADMAXIMAS OF MAGIC VAC
ACCESSORIES
under way, the yellow light turns on.
(10) Bag cutter - Press and slide in one direction or
another to cut bags of the desired size.
(11) Lid - The vacuum pump is activated by pressing the
two push buttons on the Lid.
(12) Filter - Protects the Pump against the entry of dust
and liquids that could damage it. The filter is remo-
vable to allow easy cleaning. Pull the lid toward you.
(13) Sealing gasket - It presses the bag on the sealing
bar.
(14) Airtight gaskets - They guarantee that a vacuum will
be maintained in the chamber, thus allowing air to be
removed from bags and containers.
(15) Bag compartment - For keeping a roll of bags within
reach and ready to use.
(16) Non-slip feet - They prevent the appliance from slip-
ping during use.
(17) Tray-shaped vacuum chamber - To position the open
end of the bag inside the chamber, draw air from the
bag and collect any excess liquid.
(18) Sealing bar - Teflon-coated heating element that
seals the bag and prevents it from sticking to the bar.
14
SECTION 2
®
®
BAGS
®
®
AVAILABLE
page 20-24
®
page 20
page 21
page 22
page 22-23
page 23
page 24
page 69-70
Publicidad
Capítulos
Tabla de contenido
