Bond 52168 Manual Del Usuario página 5

CONTENTS ASSEMBLY INSTRUCTIONS
1. Attach the handle (A) to the lid (B) by securing
it to the hook (C) under the fire bowl (B) as
illustrated in fgure 1. Secure with two M6x10
black bolt (AA) and two M6 wing nuts (HH).
Tighten with the wrench (GG).
Hardware Used
M6x10mm
AA
Black Bolt
HH
M6 Wing Nut
GG
Wrench
2. Attach the door latch (G) to the door
assembly (F) using one M6x10mm silver
screw (CC) and one M6 silver nut (DD).
Tighten with a Phillips screwdriver and the
wrench (GG).
Hardware Used
M6x10mm
CC
Silver Screw
DD
M6 Silver Nut
GG
Wrench
3. Connect the side panels (D) and the door
assembly (F) together to form a circle. Attach
the upper connectors (E) and lower connectors
(H) to the inside top and bottom of the side
panels and the door assembly as illustrated in
fgure 3. Insert two M6x10mm silver screws (CC)
to each connector and secure with two M6 silver
nuts (DD). Tighten with a Phillips screwdriver
and the wrench (GG). Make sure the protruding
part of the upper connector (E) faces outwards.
Hardware Used
M6x10mm
CC
Silver Screw
DD
M6 Silver Nut
GG
Wrench
1
x 2
x 2
2
2
F
x 1
x 1
3
F
CC
x 16
x 16
AA
C
HH
CC
D
E
DD
H
A
B
DD
G
Page 5