Ending A Call - Panasonic KX-TG9581 Manual De Instrucciones

Making a call by entering a phone number manually
Manual dialing is not available when viewing contacts.
Outlook 2007
1
Select the desired phone line.
To use a landline
Click [Call from line1] or [Call from
line2].
To use a cellular line
Click [Call from cell] and then
select the desired cellular line.
2
Click the field next to [Dial number].
R If [Phone numbers] is displayed
instead of [Dial number], exit the
contacts display mode.
3
Enter the desired phone number.
R 24 characters max. Valid
characters are 0–9, *, #, p
(pause), and f (flash).
4
Press your computer's MEnterN key.

Ending a call

When using a landline
Click [Disconnect line1] or [Disconnect line2].
When using a cellular line
Click [Disconnect cell] and then select the desired cellular line.
Note:
R You can also end a call by pressing MZN on the base unit.
Setup Guide for Telephone Plug-in
All other versions
1
Click the field next to [Dial number].
R If [Phone numbers] is displayed
instead of [Dial number], exit the
contacts display mode.
2
Enter the desired phone number.
R 24 characters max. Valid
characters are 0–9, *, #, p
(pause), and f (flash).
3
Select the desired phone line.
To use a landline
Click [Call from line1] or [Call from
line2].
To use a cellular line
Click [Call from cell] and then
select the desired cellular line.
7