Menu Guide; Wireless Lan System; Mode; Settings - Nikon WT-2 Manual De Referencia

Menu Guide

This section describes the settings available for the
Wireless LAN option in the camera setup menu
when the WT-2 is connected.

Wireless LAN system

Turn the WT-2 transceiver on or off.
Option
Off WT-2 receives no power from camera. Select
(default) this option to reduce drain on batteries.
WT-2 on; wireless communication possible. If
ftp mode is selected, transmission of images
On
marked with "send" icon begins immediately.

Mode

Choose FTP for ftp mode (
mode ( 14).

Settings

Adjust wireless network settings (
tings ( 37–38), or PTP / IP settings (
24
Description
5), PTP / IP for PTP / IP
25–35), ftp set-
36).