Confi Guring The Wireless Lan Adapter - Nikon WT-2 Manual De Referencia

Next, open "Home Directory" and select A directory located on this com-
puter. The root directory for images uploaded to the ftp server is listed in
the Local Path text box; choose a folder and check Read, Write, and Log
visits.
Before proceeding to the next step, click OK to close the properties dialog.
Confi guring the Wireless LAN Adapter
The minimum information needed to confi gure a wireless LAN adapter is
listed below. Contact the manufacturer for details.
Wireless mode
SS-ID
Encryption (WEP)
"Any" connection
Channel
IP address
Default gateway
MAC address
1
Same SS-ID must be assigned to WT-2.
2 Not required if adapter does not support "any" connection.
3 In this example, it is assumed that network uses class C private IP addresses and sub-
net masks. Address assigned to adapter must differ from addresses of server and WT-
2. For example, if ftp server is 192.168.1.3, 192.168.1.1 can be assigned to adapter
and 192.168.1.2 to WT-2. All addresses must be in same class.
4
If MAC address is required, enter MAC address for WT-2 (
802.11b or 802.11g
1 D2X
Off
2 Disabled
Any
3 Obtain IP address automatically: Off
IP address: 192.168.1.1
Subnet mask: 255.255.255.000
000.000.000.000
DNS 000.000.000.000
4
Unspecifi ed
31).
45