Klipsch KPT-8000-M Manual De Instalación página 12

SURROUND SPEAKER MOUNTING
1.75" length screws allow for maximum safety cable attachment
thickness of 0.875" (22.53 mm).
Exceeding max Safety Cable Attachment Thickness requires screw
substitution. The length of the screw must accommodate a minimum
0.75" (19.05 mm) and a maxmimum 1.5" (38.1 mm) thread engagement
between screw and surround speaker.
(CONT.)
Safety Cable
Attachment
Screw and Washer
3/8-16 x 1.75 UNC 2A
Safety Cable
Attachment Thickness
Consult with a licensed structural engineer
for proper speaker bracket/wall attachment.
Make sure all surfaces supporting the surround
speakers are sturdy and capable of safely
holding at least 10 times the total weight of the
surround speakers and associated equipment.
A Safety Cable attachment point is provided if a
Safety Cable is required by your local codes.
Klipsch Cinema Surround Speakers are
designed to be wall OR ceiling mounted.
THE SOUNDFOLD SB-6 AND SB-7
BRACKETS ARE FOR WALL-MOUNT
USE ONLY. Consult a third-party bracket
supplier* for brackets approved for ceiling
mounting. Make sure to suspend on ceiling
in accordance with all local codes.
Apply a thread locking adhesive to all threaded
fasteners. The Safety Cable Attachment screw is
.375" (.952cm) diameter and can accommodate
mounting materials up to .875" (2.22cm) thick.
If no safety cable is being utilized, leave screw
in speaker as is.
*adapttechgroup.com