SilverStone TREASURE Serie Manual De Instrucciones página 15

SILVERSTONE TS01B 2.5" RFID EXTERNAL ENCLOSURE
Q.
Why can't I see the external drive in the "File Management" after having successfully setup the encryption?
A.
You need to setup the partition and formation of the hard drive. Please see the partition setup procedure.
Q.
Why do I need to use the RFID key after removing the TS01B external hard drive and connecting it again,
when I have already setup the encryption?
A.
The setup procedure is not complete until making partition and formation.
Please setup the encryption and partition again.
Q.
Why can't I access the secured hard drive in other external enclosures?
A.
You have to access the secured hard drive only with TS01B external enclosure.
This is to protect your data from being stolen by others.
Q.
How to access the encrypted hard drive if the external enclosure is broken?
A.
You have to buy a new TS01B external enclosure, install the encrypted hard drive into the enclosure
and setup the encryption with original two RFID keys again. The external disk is ready to work when
the LED changes to green color.
Q.
When failed in setting up RFID encryption, the TS01B external enclosure takes long time to respond?
A.
When you fail in setting up RFID encryption three times with any of the RFID key, the TS01B enclosure
will idle for three minutes. In addition, it will be idle for five minutes if accumulative errors reach six
times and ten minutes if you failed nine times. The LED indicator will flash every one second in red
during idle period. After the idle time, the LED will flash as encryption awaiting mode.
13