General Description - Samoa U-dat Power + Guía De Servicio Técnico Y Recambio

EN

GENERAL DESCRIPTION

WARNING!: Before using the device for first time, it must be
!
correctly configured. Check the "Installer's guide" for detailed
information.
KEYBOARD
ITEM DESCRIPTION
1 Shortcut key to functions displayed on screen
2 Writing keyboard
3 Numeric keypad
4 Emergency stop button
Alt graph key, which in combination with other keys,
5 allows to obtain the character shown in the upper right
part of the key
6 RFID reader
BY-PASS KEYSWITCH
In the lower part of the device there is the by-pass keyswitch (7) which
allows to activate/deactivate the by-pass mode of the solenoid valves
controlled either by the U·valve or the U·count. When the key is operated,
the units controlled by the keyboard will allow to dispense the fluid without
operating with the keyboard, simply by using the control gun trigger.
IBUTTON READER
In the lower part of the device is located a magnetic key reader (8) which
allows either the introduction of data or the user identification by
bringing the magnetic key close to the reader.
RFID READER
The RFID reader located on the keyboard (6) allows the entry of data or
user identification bringing the RFID tag close to the reader.
U·dat OPERATION
The U·dat can be operated through the alphanumeric keyboard. In some
occasions, the selection of some field will be required on touch screen.
DEVICE TURN ON/OFF
To turn on the device, press and hold the power button until the screen
turns on. After a while, the home screen will show up (figure 10).
Regardless of the menu shown on screen, after a period of inactivity, the
application will come back to the home screen.
MAIN MENU
From the home screen, press the shortcut key (1) associated with the
unlock icon to access the main menu (figure 11).
This screen shows the selected language (2), the product identifier (3),
the date and time (4), and the available menus: dispense (5), stocks (6),
transactions (7) and configuration (8). Press the associated shortcut key
to access the desired menu.
4
838 847 R. 03/19
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
4
2
Fig. 7
7
Fig. 8
Fig. 9
Fig.10
5
Fig. 11
1
5 6
3
2 3 4
6 7 8
Short cut keys to screen
functions
8
1