Emergency Stop - Samoa U-dat Power + Guía De Servicio Técnico Y Recambio

EN
TRANSACTION MENU
U·valve
Real time
quanty
Operator Order Product
Fig. 18
Fig. 19
Fig. 20
Fig. 21
6
838 847 R. 03/19
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
3
Dispensed
quantity/total
Go to completed
transactions
2
1
4
5
6
7
8
TRANSACTIONS IN PROGRESS
Immediately after launching a transaction from the "dispense"
menú, the "transactions in progress" screen is displayed
(figure 18).
All transactions in progress are displayed on the screen. Using the
navigation buttons (1) and (2) you can scroll through the list.

EMERGENCY STOP

Transactions in progress can be stopped by pressing the cancellation
button (3). Then, the cancellation confirmation of the order will be
displayed on the screen (figure 19). Enter the operator code (4) and
press the confirmation button (5) to confirm the transaction cancellation.
The emergency stop can only be used by the operator who has initiated
the order or by the "manager" user.
TOPPING
The topping can only be done by the operator who has initiated the
order or by the "manager" user.
If this option is enabled in the system, once the quantity to be
dispensed has been reached, the button that allows to supply an
additional quantity (6) is enabled.
To activate the topping, press the button (6) shown on the screen and
then the user identification and confirmation window (7) will be
displayed. Enter your user code and press the confirmation button (8).
From this moment, the solenoid valve associated with the dispensing
point remains open for a certain preconfigured period of time in the
system in order to do the topping. Both the time and the maximum
values allowed in the topping are configurable.
COMPLETED TRANSACTIONS
To see the completed transactions press the shortcut key associated
with the button . Press the key
progress view In figure 22 the information displayed is described.
Real quanty dispensed
Fig. 22
to alternate the transactions in
Go to transaction
in progress