Installing Windows - ASROCK 970 Extreme3 R2.0 Manual De Instrucciones

HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(
see p.2 No. 31)
USB 3.0 Header
(19-pin USB3_2_3)
(see p.2 No. 38)
2.8 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.9 Installing Windows

TM
Vista 64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
/ XP 64-bit on your SATA3 HDDs with RAID functions, please refer to the document
at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.10 Installing Windows
TM
Vista
If you want to install Windows
/ XP 64-bit OS on your SATA3 HDDs without RAID functions, please follow below
procedures according to the OS you install.
28
Vbus Vbus
Vbus IntA_P3_SSRX-
IntA_P2_SSRX- IntA_P3_SSRX+
IntA_P2_SSRX+ GND
GND IntA_P3_SSTX-
IntA_P2_SSTX-
IntA_P3_SSTX+
IntA_P2_SSTX+
GND
GND IntA_P3_D-
IntA_P2_D- IntA_P3_D+
IntA_P2_D+ DUMMY
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
64-bit / XP / XP 64-bit Without RAID Functions
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
ASRock 970 Extreme3 R2.0 Motherboard
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Besides two default USB 3.0
ports on the I/O panel, there is
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
TM
TM TM
/ Vista
TM TM
/ Vista
/
64-bit / XP
TM
/
64-bit / XP