Dell PowerVault MD1220 Introducción Al Sistema página 10

Redundant Array of Independent Disks (RAID)
Controller
Management
Back-Plane Board
Connectors
Sensors
Back-Panel Connectors (per EMM)
SAS connectors
Serial connector
LED Indicators
Front panel
Hard-drive carrier
8
Getting Started With Your System
Host-based RAID support using
PowerEdge™ RAID controller H800.
RAID management using
Dell OpenManage™ Server
Administrator 6.2 or later.
• 24 SAS hard-drive connectors
• Two power supply/cooling fan
module connectors
• Two sets of EMM connectors
• One control panel connector for front LEDs
and enclosure mode switch
Two temperature sensors
• One SAS IN connector for connection
to the host
• One SAS OUT connector for expansion to
an additional enclosure
NOTE:
SAS connectors are SFF-8086/SFF-8088
compliant.
One 6-pin UART mini-DIN connector
NOTE:
For engineering use only.
• One two-color LED indicator for
system status
• Two single-color LED indicators for
power and split mode
• One single-color activity LED
• One two-color LED status indicator
per drive