Philips HQC688/40 Manual De Instrucciones página 7

C
C
C
C
C
1
2
Dispose of the battery and the other
components in an environmentally safe way.
Do not connect the appliance to the mains again
after it has been opened!
5 Remove the Precision Zoom Lock` by
pulling it in the direction of the cutting
unit.
6 Remove the cover.
7 Pull out the printed circuit board.
8 Insert a screwdriver into the small slot in
the printed circuit board marked with an
arrow. Push the screwdriver down until
part of the printed circuit board breaks
off.
9 Open the plastic battery holder and take
out the rechargeable battery.
ENGLISH
9