Led Indication; Troubleshooting - LG HBM-W600 Manual Del Usuario

LED Indication

Function
Operating
Charging

Troubleshooting

Issue
Does not turn on
Unable to
communicate with
the LG HBM-W600
Unable to pair the
HBM-W600 with
Bluetooth device
Low sound (speaker) Check the speaker volume.
Cannot hear audio
streaming
12
HBM-W600 Status
Power on
Power off
Pairing mode
Headset / Hands-Free /
A2DP profiles connected The LED will flash twice every 5 seconds.
Call connected
Out of range
Charging
Charging complete
Possible problem
Check whether the battery
of the HBM-W600 is fully
charged.
Check whether the device
supports the headset or
hands-free Bluetooth profiles.
Check whether the battery of
the HBM-W600 is low.
Check and make sure the
headset is on.
Check and make sure the
headset is placed in pairing
mode.
Check whether the device is
streaming.
The LED will flash 4 times.
The LED will flash 4 times and then turns off.
The LED stays on.
The LED will flash twice every 5 seconds.
For the first 15 minutes after the devices are
disconnected the LED will flash twice every 5
seconds. After that it will flash once every 5 seconds.
(Adaptor Charging) The LED stays on.
(Wireless Charging) Depends on the HBM-W600 status.
(Adaptor Charging) The LED turns off.
(Wireless Charging) Depends on the HBM-W600 status.
Charge the battery.
Determine whether your device
supports the Headset or Hands-
free Bluetooth profiles.
Charge the battery.
Press and hold the POWER/CALL
button for at least 3 seconds to
turn on the headset.
With the Power off, press and
POWER/CALL button for 6 seconds
to manually place the headset in
pairing mode.
lncrease the volume level.
Start device streaming.
Action
Resolution