Descargar Imprimir esta página

Krups CONTROL LINE Manual De Instrucciones página 10

Ocultar thumbs Ver también para CONTROL LINE:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
English
Children should not use the appliance as a
toy.
Before plugging the appliance in, make sure that the power it uses
corresponds to your electrical supply system and that the outlet is
earthed.
Any connection error will invalidate your guarantee.
Unplug the appliance if you intend not to use it for an extended period
or during cleaning operations.
Do not use the appliance if it is not working properly or if it has been
damaged. If this occurs, contact an authorised service centre.
All interventions other than cleaning and everyday maintenance by the
customer must be performed by an authorised service centre.
The power cord must never be close to or in contact with the hot parts
of your appliance, near a source of heat or over a sharp edge.
For your safety, only use the manufacturer's accessories and spare
parts designed for your appliance.
Do not pull on the cord to unplug the appliance.
All appliances are subject to strict quality control procedures. These
include actual usage tests on randomly selected appliances, which
would explain any traces of use.
Never heat the kettle when it is empty.
Never use the appliance in a bathroom or close to a water source.
Never use the kettle when your hands or feet are wet.
Place the kettle and its power cord well to the back of the work
surface.
Always unplug the power cord immediately if you notice any
abnormality during operation.
Never leave the power cord hanging from a table top or kitchen
counter to avoid any danger of it falling to the floor.
Always remain vigilant when the appliance is on, and in particular be
careful of the steam coming out of the spout which is very hot.
Always use the filter during heating cycles.
Never touch the filter or the lid when the water is boiling.
Never move the kettle when it is in operation.
Protect the appliance from damp and freezing conditions.
10

Publicidad

loading

Este manual también es adecuado para:

Control line inoxBw442d10