Uline H-3472 Manual De Instrucciones página 2

CAUTION! Fully assemble the cleaner before
using. Make sure on/off switch is in the off
position before plugging in.
1. Snap the hose into the inlet in the bag cover of the
canister. The hose can be released by depressing the
two release buttons. (See Figure 1)
2. The power cord is stored on the bottom of the canister
by wrapping around the cord hooks. The front hook
swivels to provide a quick release feature.
(See Figure 2)
3. The shoulder strap snaps into the handle in two
locations. (See Figure 3)
PAGE 2 OF 15
ASSEMBLY
4. Twist the slip ring (A) to adjust the amount of suction.
The tool caddy (B) holds the upholstery tool (C), the
dusting brush (D) and the crevice tool (E).
(See Figure 4)
Figure 1
Figure 2
5. Telescopic wand (F) adjusts to different cleaning
heights. The combination floor tool (G) works on both
carpet and hard surfaces by moving the lever on
the floor tool head to either the carpet or bare floor
position. (See Figure 4)
6. Optional HEPA filter snaps onto the rear housing. The
crevice tool can also be stored in the handle (H).
(See Figure 5)
Figure 3
Figure 4
D
C
B
E
H
A
F
G
Figure 5
0920 IH-3472