Zyxel LTE7410 Manual De Instrucciones página 6

5. 6.
7. Repeat steps 1 to 6 to connect a PoE and VoIP cable on the LTE
Device.
8. Connect the CAT5 Ethernet cable which is already connected to the
LTE Device to the provided PoE injector's OUT port.
Do not connect a computer or a switch directly to the PoE injector's
OUT port due to the high PoE power (48V).
9. Connect the IN port of the PoE injector to a computer with an Ethernet
cable for initial configuration.
6