Using The Memory Preset Tuning; Memorizing Only The Desired Stations; Receiving The Memorized Stations - Sony XR-6030 Manual De Instrucciones

Using the Memory Preset Tuning

EJECT
VOLUME BALANCE
POWER OFF

Memorizing Only the Desired Stations

For example, store a station on the preset number button 1.
1
Tune in a desired station.
Using automatic or manual tuning (page 8).
2
Keep the preset number button pressed for about two
seconds until the "MEM" indication comes on in the
display window.
1
Repeat the same procedure to store other stations.

Receiving the Memorized Stations

Select the desired band. Press the desired preset number
button lightly.
1
2
DSPL BASS
1
MANU
4
FM/AM
FM1
6
PUSH
DIR
SEEK HI-FILTER
/MANU
2 3
5 6
MEM
Up to 6 stations on each
band (FM1, FM2, and AM)
can be stored on the preset
number buttons in order of
your choice.
Only one station per band
(FM1, FM2, and AM) can be
stored in the memory on each
preset number button.
If you try to store another station
on the same preset number
button, the previously stored
station will be erased.
When the "MEM" indication
comes on, the station is stored in
the memory and the operation is
completed. The "MEM"
indication goes off after a while.
Note
If you keep pressing the preset
number button for more than two
seconds, the currently received
station will be memorized again.
To receive the previously
memorized station, make sure
that the preset number button is
pressed only lightly.
9