Kohler VESSELS Turnings 76 Instrucciones De Instalación página 3

Apply sealant around the countertop cutout hole. Apply
the sealant approximately 1/4" (6mm) away from the
cutout hole edge.
Do not substitute another sealant for the one provided.
Set the lavatory into the countertop cutout. Use care to
avoid smearing the sealant bead. Wipe away any excess
sealant with a clean cloth.
Follow the instructions listed on the sealant label. Allow
the sealant to set for 30 minutes or more. Connect the
drain and faucet supply fittings.
Turn on the water supplies, and check for leakage.
Kohler Co., Kohler, WI, U.S.A.
Bead of Sealant
Cutout Hole
3
1/4"
(6mm)
Fig. #5
1007250-2-
A