Water Tank - SCANMASKIN World Serie Manual

1.3

Water tank

Figure 11 Standard SCANMASKIN 32 WS
Scanmaskin 32 WS has a built-in water tank (1.) that can be used to keep the grinding tools at the
lower temperature and in those occasions where it´s not possible to use a dust collector together
with the machine.
The water tank has a built-in system that prevents the water from getting out while the machine is tilt-
ed back for grinding tool exchange. It also has a filter that prevents larger debris to get into the tank.
System in general:
Inside the floating cover over the machine house there is a sprinkler system connected to the water
tank. To engage the water flow after filling he water tank set the control on the operation panel Water
to "1". To stop the flow, turn the control nub to "0"
At the backs lower end of the machine chassis underneath the electrical cabinet there is a valve to
adjust the flow of water.
74
www.scanmaskin.com