Built In Water Tank; Tools - SCANMASKIN SCAN COMBIFLEX 500I Manual De Instrucciones

1.3.2 Built in water tank

The cover of the gear barrel is configured in the same manner as with the previous option but
instead of an external water connection the machine features a 18 l built in water tank
The flow of the water is controlled by a knob on the right hand side of the machine.
The operation of the knob is described in "4.4 Water tank SC-500PD".
Figur 11-2 SC-500i
1.4

Tools

The machine must be equipped with tools approved by Scanmaskin Sweden AB before
operation.
See "Grinding guide" for information about available tools and "4.12 Changing tools" for
information about how to change the tools.
The tools are fitted using the Scan-On system for easy fitting.
Available tools
• SC-Tiger PCD
• Diamond tools
• Sand paper
46
Figure 11 SC-500PD with watertank
www.scanmaskin.com