Task 5: Installing Software Drivers - Promise Technology SUPERTRAK EX8760T Guia De Inicio Rapido

SuperTrak EX8760T, EX8768 Quick Start Guide
• To change the Write Cache Policy, highlight Write Cache Policy and
press Enter.
Highlight your choice of Write Through or Write Back and press Enter.
• To change the Read Cache Policy, highlight Read Cache Policy and
press Enter.
Highlight your choice of None, Read Cache, or Read Ahead and press
Enter.
13. Highlight Save Configuration and press Enter.
The Logical Drive Management screen appears with your new logical drive.
At this point you can create additional logical drives, if there is physical drive
space available. To create another logical drive, repeat steps 4 though 13
above.
14. Press the Esc or F10 key to exit the SuperBuild utility and press Y to confirm
and restart your computer.
Do not press the Ctrl-Alt-Del keys.
You have successfully created a new RAID logical drive.

Task 5: Installing Software Drivers

Drivers for Windows and some Linux operating systems are included on the
Software CD that came with your SuperTrak EX Controller card. Please
download the latest drivers from the Promise
See Chapter 3 of the SuperTrak User Manual on the Software CD for step-by-
step instructions for driver installation.
You must be partition and format your new logical drive before you
can use it. Use the same method of partitioning and formatting a
logical drive as you would any other fixed disk added to your
computer system.
Important
support website.
12