Symbols And Display - Timken VHIN 10 Manual Del Usuario

• Use the main switch to switch on the current. The machine will emit a
short bleep and the display will show a "pre-set goal temperature" set
by the manufacturer.
• Connect the temperature probe by inserting the plug in the socket. Make
sure that – and + correspond on both plug and socket
• The induction heater is now ready to be used in the temperature func-
tion mode.
4.
Symbols shown on the heater:
Display:
Increase time/temperature -
Operate using Time Mode -
noticeheaterGB.indd 10

Symbols and Display

Prohibited for people with a
pacemaker.
Magnetic field may have influence.
No watches or other metal objects
allowed.
Magnetic field may have influence.
Start operation -
Use heat-resistant
gloves
Read the
instructions
- Display: time or temperature
- Reduce time/temperature
- Operate using Temperature
Mode
- Stop operation/automatic
demagnetisation
10
17/10/06 15:16:57