Cleaning And Maintenance - Timken VHIN 10 Manual Del Usuario

• If a loud vibrating noise is heard, first check to see that the contact sur-
faces of the yokes are greased sufficiently. Then check to see that the
yoke is making optimal contact with poles. (To adjust yokes: Place yoke
on heater, unscrew the bolts in the yoke ¼ turn. Switch on heater and the
yoke will set itself. Re-tighten the bolts.You can also use a nylon hammer
as an aid to reposition the laminates).
WARNING!
• If in any doubt, isolate the machine and contact your
local distributor.
8.
• Store in a dry, frost-proof area, free from humidity.
• Keep clean with a soft, dry cloth.
• Keep the contact parts of the poles clean. Grease regularly with an acid-
free grease for optimal contact with the yokes and to prevent corrosion
(on swing-arm models, also grease the vertical pin regularly).
• Contact your supplier if there is any suspicion of malfunctioning.
WARNING!
• Proper maintenance and handling practices are critical.
Failure to follow installation instructions and to main-
tain proper lubrication can result in equipment failure,
creating a risk of serious bodily harm.
noticeheaterGB.indd 17

Cleaning and Maintenance

17
GB
17/10/06 15:17:04