Switch On/Off - SteelTech Easy Line Manual De Operación

Adjust the "Operating switch for
heating" (2) to position for desired
heating level.
Signal lamp (1) lights up.
When signal lamp is light the heating
of the boiling pan is connected up when
the boiling is in working position.
Adjust the "Tilting" in counter
clockwise direction towards
the symbol for tilting.
The boiling pan stops in its position
when the knob is let or by max.
tilting position.
The knob will automatically go back
to normal position when let go.
A. Safety valve
B. Pressure gauge
C. Steam trap
D. Measuring tap (for HSE or other accredited body
when inspecting)
E. Vacuum valve
C B
Fig. 7
A:1.
Fig. 7A

SWITCH ON/OFF

TILTING OF PAN
A E D
A:2.
Adjust the "Operating switch for
heating" (2) to position 0.
Signal lamp (1) will go out.
When signal lamp is out the heating
of the boiling pan is disconnected.
Adjust the "Tilting return" clockwise
towards the symbol for working
position.
The boiling pan stops in its position
when the knob is let, or when it reach
it's working postion.
The knob will automatically go back
to normal position when let go.
1. Signal lamp
2. Operating switch heating
3. Position/symbol for tilting
4. Position/symbol for tilting return
5. Knob for tilt/-return
1
2
3
4
5
21