Panasonic WV-Q116E Manual De Instrucciones página 4

9. Remove the plate from the camera
mounting base (camera accessory).
10. Attach the camera mounting base to
the bracket. Adjust the lock plate so it is
in the orientation show in the following
illustration, and then tighten the four
M4-L 8 Screws (provided).
Cables
M4-L8
Plate
Bracket
Orientation
of installation
Lock plate
11. Connect the fall prevention wire to the
camera mounting base.
Note: Tug on the Fall Prevention Wire to
make sure it is secure.
12. Install the camera to the camera mount-
ing base.
*The top case is not shown in the fol-
lowing illustration.
- 4 -
Rotate
Base
unit
Camera