• The trimming position mark indicates the trimming heights as follows.
Trimming position mark
►Trimming without a comb attachment
Trimming without a comb attachment will trim hair length to approx. 0.5 mm.
Care
Removing and mounting the blade
Removing the blade
Hold the trimmer with the switch facing
upward and push the blade with your
thumb while catching the blade in your
other hand.
Mounting the blade
Fit the mounting hook into the
blade mounting on the trimmer
and then push in until you hear a
click.
Cleaning the blade
Use a brush to clean the blade.
Clean the trimmer and the blade after each use.
Brush the hairs out from between the
stationary blade and the moving blade
while pressing down on the cleaning lever
to raise the moving blade.
12
Trimming height (approx.)
1
2
3
4
5
6
3 mm
6 mm
9 mm
12 mm
15 mm
18 mm