Metra 99-7342 Instrucciones De Instalación

KIT COMPONENTS
• A) Radio trim panel • B) (2) A/C vent trim panels • C) Radio brackets • D) Pocket • E) Passenger airbag light blank plate • F) Thermistor plate mount
• G) Hazard switch blank plate • H) (14) 1/2" Phillips screws • I) (2) #8 x 3/8" pan-head screws • J) (4) #8 x 3/8" truss-head screws
A B
Metra. The World's Best Kits.
®
Hyundai Sonata GLS/SE
Sonata
Sonata Hybrid
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted black and silver to match factory dash
C D
G H
MetraOnline.com
2011,
(without NAV)
2012-2014,
(without NAV)
2011-2013
(without NAV)
E F
I J
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-7342
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ................................................... 3-4
Kit Assembly
–ISO DIN radio provision with pocket ..................5
–ISO DDIN radio provision .....................................5
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 • AX-HYKIA1-SWC
& AX-HYKIA-SPDIF (for amplified models)
Antenna Adapter: Not required
Steering wheel control interface: ASWC-1
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/4/18 INST99-7342