Ocultar thumbs Ver también para 99-7347B:

Publicidad

Idiomas disponibles

Idiomas disponibles

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
Metra. The World's Best Kits.
®
Hyundai Accent
(excluding Radio Delete models)
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted Black to match factory finish
C
D
MetraOnline.com
2012-2017
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-7347B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly
–ISO DIN radio provision with pocket . .................3
–ISO DDIN radio provision . ....................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304
Antenna Adapter: Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/4/18 INST99-7347B

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-7347B

  • Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/4/18 INST99-7347B...
  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Remove the radio surround panel from the dash. Disconnect all harnesses. (Figure A) 2. Remove (4) Phillips screws securing the radio chassis in the sub dash. Disconnect the harnesses and the antenna. (Figure B) Continue to Kit Assembly (Figure B) (Figure A) 1.800.221.0932 MetraOnline.com...
  • Página 3: Kit Assembly

    1. Snap the radio trim panel into the 1. Snap the radio trim panel into the factory radio surround panel. (Figure A) factory radio surround panel. (Figure A) 2. Attach the pocket to the radio brackets 2. Attach the radio brackets to the radio using the (4) supplied #8 x 3/8” Phillips using the screws supplied with the screws. (Figure B) radio. (Figure B) (Figure A) (Figure A) 3. Remove the metal DIN sleeve and trim 3. Locate the factory wiring harness & ring from the aftermarket radio. antenna connector in the dash. Metra recommends using the proper mating 4. Slide the radio into the completed adapter from Metra or AXXESS. Test the assembly, and secure it using screws radio for proper operation. supplied with the radio. (Figure B) 4. Reassemble the dash in reverse order of 5. Locate the factory wiring harness & disassembly. (Figure C) antenna connector in the dash. Metra recommends using the proper mating (Figure B) (Figure B) adapter from Metra or AXXESS. Test the radio for proper operation.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/4/18 INST99-7347B...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/4/18 INST99-7347B...
  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Remove the radio surround panel from the dash. Disconnect all harnesses. (Figura A) 2. Quite los (4) tornillos Phillips que sujetan el chasís del radio en el tablero sub. Desconecte los arneses y la antena. (Figura B) Continúe con el Ensamble del Kit (Figura B) (Figura A)
  • Página 7: Ensamble Del Kit

    Metra recomienda que use adaptadores adecuados de acoplamiento de Metra 4. Deslice el radio en el ensamble o de AXXESS. Pruebe el radio para terminado, y luego sujételo con los...
  • Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/4/18 INST99-7347B...

Tabla de contenido