Metra 99-7341B Manual Del Usuario
Ocultar thumbs
Ver también para 99-7341B:
- Instrucciones para la instalación (8 páginas) ,
- Instrucciones de instalación (8 páginas)
Publicidad
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-7341B
2010 HYUNDAI TUCSON
99-7341B
KIT FEATURES
•
ISO DIN Head Unit Provision With Pocket
•
DDIN Head Unit Provision
•
Painted Matte Black To Match Factory Dash
KIT COMPONENTS
• A) Radio Trim Panel • B) ISO Brackets • C) Pocket • D) (4) 3/8" Phillips Head Screws
A
• Panel Removal Tool • Phillips Screwdriver • Socket Wrench
METRA. THE WORLD'S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
APPLICATIONS
B
WIRING & ANTENNA CONNECTIONS (Sold Separately)
• 70-7304 2010 Kia/Hyundai Harness
TOOLS REQUIRED
C
metraonline.com
D
Publicidad
Manuales relacionados para Metra 99-7341B
Resumen de contenidos para Metra 99-7341B
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7341B APPLICATIONS 2010 HYUNDAI TUCSON 99-7341B KIT FEATURES • ISO DIN Head Unit Provision With Pocket • DDIN Head Unit Provision • Painted Matte Black To Match Factory Dash KIT COMPONENTS • A) Radio Trim Panel • B) ISO Brackets • C) Pocket • D) (4) 3/8” Phillips Head Screws WIRING &...
- Página 2 • ISO DIN HEAD UNIT PROVISION ....2 • DOUBLE DIN HEAD UNIT PROVISION ... 3 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
- Página 3 99-7341B DASH DISASSEMBLY 2010 HYUNDAI TUCSON Unclip and remove trim panel above the radio. (Fig. A) Unclip and remove the hazard switch panel. (Fig. B) Remove (4) Phillips screws securing the radio. (Fig. C)
-
Página 4: Iso Din Head Unit Provision
99-7341B KIT ASSEMBLY ISO DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. Mount the pocket to the ISO Brackets using the supplied (4) screws. - Página 5 99-7341B KIT ASSEMBLY DOUBLE DIN HEAD UNIT PROVISIONS Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. Mount the DDIN radio to the ISO Brackets with the screws supplied with the unit.
- Página 6 NOTES...