SEVERIN HV 7153 Manual De Instrucciones página 17

The brush roller
and LEDs switch off
automatically.
Service hotline
If you cannot solve the problem using the table, call our Service hotline (see contact information in the appendix to this
instruction manual).
Item number
3604-048
3938-048
5178-048
3607-048
Removing the rechargeable battery
1. Loosen the screw on the underside of the device.
2. Remove the rechargeable battery from the rechargeable battery compartment.
Disposing of the appliance and rechargeable battery separately
Devices and batteries marked with this symbol must be disposed of separately from household waste! Devices and
batteries contain valuable raw materials that can be recycled. Proper disposal of these items protects the
environment and public health. Return the device and the battery separately to the appropriate collection points for
disposal.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two years from the date of
purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing
the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been
used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any
unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. This
guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national
legislation governing the purchase of goods. If the product fails to operate and needs to be returned, pack it carefully,
enclosing your name and address and the reason for return. If within the guarantee period, please also provide the
guarantee card and proof of purchase.
The warranty also excludes batteries and accumulators that have become faulty due to normal wear and tear or incorrect
handling, or those where the battery life has been reduced.
This is a safety function that prevents the nozzle becoming defective if the brush roller gets
jammed.
The brush roller is either dirty and needs to be cleaned, chapter "Cleaning the brush roller"
or something has got jammed in the brush roller, e.g. when vacuuming a high pile carpet. To
override the power-off, switch off the vacuum cleaner, take the nozzle off of the suction tube or
the hand-held vacuum cleaner and remove any objects that may be blocking the brush roller.
The brush roller and LEDs will function again as normal when the
vacuum cleaner is next switched on.
Motor pre-filter
Brush roller for floor tool
Brush roller for upholstery tool
Rechargeable battery 22.2 V
Disposal and warranty
Description
17