Operation
Measurement Benchmark Setting
Press
to switch between front benchmark and end benchmark functions.
The meter takes the end benchmark as its default.
Front Benchmark
End Benchmark
Function Setting Switch
1 Press and hold
until the
icon flashes.
2 Press the keypad keys to select the mode you want to use.
Battery Power
The meter's battery power is at full capacity when the
icon displays all
three bars. When the icon is missing bars, battery power has been used. This
icon will flash when a battery replacement is required.
Signal Strength
The meter's signal is at full strength when the
icon displays all five bars.
The signal is weaker when fewer bars are displayed.
Data Storage/Invoke
1 Press
.
2 Press
to navigate the values previously found/measured.
11
17-07-267-93374D.indb 11
9/6/2017 8:36:59 AM