Tripp-Lite T030-50M El Manual Del Propietario página 9

Operation
2 Turn on the device and activate the laser. Once the laser is activated, press
triangle's hypotenuse will flash. Press
the (a) dotted line of triangle. Repeat this step twice to measure the second
dotted line of the triangle (b) and then the third dotted line of the triangle
(c). The length of (x) of the solid line is calculated automatically by the
meter.
3 Turn on the device and activate the laser. Once the laser is activated, press
triangle's hypotenuse will flash. Press
the (a) dotted line of triangle. Repeat this step twice to measure the second
dotted line of the triangle (b) and then the third dotted line of the triangle
(c). The length of (x) of the solid line is calculated automatically by the
meter.
17-07-267-93374D.indb 9
four times for the screen to display the
five times for the screen to display the
icon. In the icon, the top
to first measure the length of
icon. In the icon, the top
to first measure the length of
9
9/6/2017 8:36:59 AM