Publicidad
DOOR MOUNT WITH
DOUBLE SIDED TAPE
STEP 7
Apply double stick tape to the
door brackets. Attach cabinet door
to the brackets while trying to
keep door level. Don't worry if it is
off a little. This can all be adjusted.
Double stick tape will hold the
door in place while you screw the
brackets to cabinet door (See
Figure 7).
NOTE: Although this method is
the quickest and easiest method
to attach the door, it does limit
adjustability since the door will
become adhered to the brackets.
STEP 8
Hang door with brackets
attached on the mounting screws
on the product member. Tighten
bottom screws securely. Tighten
top screws (with washer) snugly
allowing for future adjustment
(See Figure 8).
STEP 9
If your cabinet door is not
straight (even all around) you can
adjust it by loosening the screws
on one of the sides, properly
align the cabinet door and re-
tighten the screws (See Figure 9).
If your door is parallel but slightly
off center, loosen screws from
step 5, re-position assembly as
needed and re-tighten screws.
4
FIG. 7
Place Tape Here
FIG. 8
FIG. 9
Customer Service: 800-626-1126 | rev-a-shelf.com
Place Tape Here
Publicidad
