Rated Data; Noise And Vibration Data; Environmental Protection - GRAPHITE 59G093 Manual Del Usuario

RATED DATA

Power supply voltage
Power supply frequency
Rated power
Rated rotational speed
Max. grinding wheel diameter
Inner disc diameter
Spindle thread
Protection class
Weight
Year of manufacture

NOISE AND VIBRATION DATA

Information regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure Lp
measurement uncertainty K have been given in the instruction manual as defined in the EN 60745 standard.
The following vibration value (acceleration value) a
as defined in the EN 60745 standard.
The vibration level provided in this instruction manual have been determined according to the measurement
procedure as defined in the EN 60745 standard and can be used for comparison of power tools. This can be
used for preliminary assessment of exposure to vibrations.
The provided vibration level is representative for main applications of the power tool. If the power tool is
used for other applications or with other working tools, and if it is not sufficiently maintained, the vibration
level may vary. The aforementioned reasons may increase the exposure to vibrations during the entire
operating period.
In order to precisely estimate the exposure to vibrations, periods should be accounted for, in which the
power tool is switched off, or when it is switched on, but not operated. Thus, the total exposure to vibration
may prove considerably lower.
Additional safety measures should be taken to protect the user against effects of vibrations, such as:
maintenance of the power tool and its working tools, ensuring proper temperature of the hands and proper
organisation of work.
Acoustic pressure level: Lp
Acoustic power level: Lw
Vibration acceleration value (rear handle): a
Vibration acceleration value (front handle): a
Electrically powered products should not be disposed of with household wastes, but should be
utilised in proper recycling centres. Obtain information on waste recycling from your seller or
local authorities. Used electric and electronic equipment contains substances active in the natural
environment. Unrecycled equipment constitutes a potential risk for the environment and human
health.
* The right to make changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.
SPECIFICATIONS
Angle Grinder
Parameter
= 95 dB(A) K= 3 dB(A)
A
= 106 dB(A) K= 3 dB(A)
A
= 6,16 m/s
h
= 6,556 m/s
h

ENVIRONMENTAL PROTECTION

and acoustic power level Lw
A
and measurement uncertainty K have been determined
h
2 K= 1.5 m/s 2
2 2
K= 1.5 m/s
24
Value
230 V AC
50 Hz
1010 W
11000 min -1
125 mm
22,2 mm
M14
II
2,4 kg
2015
and
A