Getting Started - Rowenta REFERENCE CERAMIC CF7500D0 Modo De Empleo

NOT CF7500 011388.qxd 12/04/06 15:57 Page 8
• Do not leave within the reach of children.
GB
• Do not use if the cord is damaged.
• Do not immerse or put under running water,
even for cleaning purposes.
• Do not hold with damp hands.
• Do not hold the appliance by the casing, which is hot, but by
the handle.
• Do not unplug by pulling on the cord, rather pull out by
the plug.
• Do not use an electrical extension lead.
• Do not clean with abrasive or corrosive products.
• Do not use at temperatures below 0°C and above 35°C.
GUARANTEE
Your appliance is designed for use in the home only.
It should not be used for professional purposes.
The guarantee becomes null and void in the case of
improper usage.

3. GETTING STARTED

Your hair straighteners heat up quickly and remain at a
constant temperature while in use :
• Plug in the straighteners – switch on position 0.
• Select the temperature best suited to your hair type.
- Position 1: for fine hair
- Position 2: for thick hair
• Wait for two minutes.
The straighteners are now ready for use (fig. 2).
• Unplug your straighteners after use and leave to cool down
completely before putting them away.
4. OPERATION
Use this product on clean, untangled, dry (or slightly damp) hair.
• Do not use the straighteners on synthetic hair (wigs,
extensions, etc.).
• Gather a small section of hair a few centimetres wide,
comb it and place it between the plates and slowly slide the
straighteners down the length of the hair from the roots to the
tips (fig. 3), the comb guide will help hold the section in place.
• If your hair is very thick or frizzy, you can improve the result
by spraying your hair with water before straightening.
• The ceramic plates protect your hair from excessive heat,
thanks to an even distribution of the heat.
• Wait until your straightened hair has cooled down before
styling (fig. 4).