Technical Data - Trotec BG20 Manual De Instrucciones

Technical data
Measurement range . . . . . . . . . . . . . . . . . . 0-1000 ppm
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ppm
Accuracy . . . . . ±5% or ±10 ppm (whichever is greater)
Sensor Type . . Stabilized electrochemical Gas-specific (CO)
Sensor Life (Typical) . . . . . . . . . . . . . . . . . . . . . . . 3 years
Warm-up Period . . . . . . . . . . . . . . . . . . . . . . <20 seconds
Power supply . . . . . 9V Battery (NEDA 1604 or IEC6F22)
Battery life . . . . . Approx. 50 hours with alkaline battery
Operating Temperature . . . . . . . 0 to 50°C (32 to 122°F)
Storage Temperature . . . . . . -30 to 60°C (-22 to 140°F)
Operating Humidity . . . . 0 to 99% RH (non condensing)
Dimensions . . . . . 6.3 x 2.2 x 1.57" (160 x 56 x 40 mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.35oz (180g)
G
When the unit is moved from a warm location to a cold
location (or vice versa), this relocation can lead to con-
densation formation on the electronic measuring equip-
ment. This physical effect, which cannot be prevented
for constructional reasons, invariably leads to deviations
in measurement. The unit requires an "acclimatisation
time" of approx. 15-30 minutes, depending on how high
the temperature differences were, before the measuring
process can be continued.
January 2003 concerning old electrical and electronic
equipment. At the end of its life please dispose of this
instrument in a manner appropriate to the relevant legal
requirements.
Operating Manual – Carbon-Monoxide-Meter
In the European Union electronic equipment
must not be treated as domestic waste, but
must be disposed of professionally in ac-
cordance with Directive 2002/96EU of the
European Parliament and Council of 27th
B - 5